Home
Products Link
Technical Papers Link
Contact Coprise
Liquid Dispensing
Production Solders $ Fluxes
PCB Rework & Repair Kits
Power Screwdrivers
JB1113
DSP501A
DSP501A-4
SL101
DB815
PPD130
Home
Contact Coprise
-JB1113 Dispenser
DSP501-4 Dispenser
SL101 Digital Dispenser
DB815 Manual Dispenser
PPD130 Peristaltic Pump
DSP501A Dispenser
Assembly Products
About Coprise
Coprise
production solutions for
industry
Service: 956-541-7393
®
Precision Liquid Dispensing Controllers for Assembly
JB1113 Liquid Dispenser - Timed Shot

The JB1113 is the most popular bench dispenser for automatic dispensing
used in industry today offering excellent value and features. It is used for
many industrial syringe applications from low viscosity cyanoacrylate
to high viscosity silicone.
© I&J Fisnar Inc. 2007 all rights reserved
DSP501A Liquid Dispenser High Volume Controller - Timed Shot

The DSP501A is recommended for liquid dispensing applications requiring a
larger volume of pneumatic pressure such as when dispensing silicone
from cartridges, glue from tubes with an autotube system or controlling a 3-way dispensing valve. The system exhausts a greater volume of air, which helps prevent post dispense drooling.
DSP501A-4 Multiple Output Dispenser - Timed Shot

The DSP501A-4 controller has the same characteristics as a DSP501A, but features ganged pneumatic outputs for simultaneous dispensing of up to four syringes or valves. The dispenser is controlled by a foot switch and the controller's timer takes control of the dispense period. The suck-back feature helps to prevent possible dripping or fluid drool.
SL101 Digital Dispenser - Nine Programs - Three Modes

The latest in digital dispensing technology with a clear digital display, the
SL101 dispenses timed controlled micro shots from 0.01 to 0-9999secs.
The digital system has three modes of operation, manual, timed and
cycling. Nine programs may be stored in memory. Suitable for use as a bench dispenser or integrated to an automated system.
DB815 Liquid Dispenser - Manual

When a non electrically operated dispensing system is required for
hazardous environments where electrical switching is not recommended,
the DB815 dispenser is suitable. The DB815 is an economic pneumatic
foot switch operated system, which is placed under a bench on the
floor, a longer hose reaches from the dispenser to the bench.
PPD130 Peristaltic Pump Dispenser

Air free dispensing is often required for accurate dispensing and transfer
of volatile liquids, the technology is proven and the pumps are chosen to
avoid hazardous substances. Operator contact is limited and the PPD130
can dispense shots between 0.01 - 6ml/min using Teflon tubing. The
pump is reversible to provide snuff-back.
Texas & Mexico