production solutions for
© I&J Fisnar Inc.. 2007 all rights reserved
Valves for Precision Dispensing
A lightweight valve that is suitable for hand held operations and high cycling
automated dispensing applications. The cartridge valve has a maximum fluid pressure
of 300psi and can dispense low to medium viscosity fluids. Cartridge valves can be
used for silicone dispensing, RTV and silicone oil dispensing, grease dispensing and
Diaphragm valves are used with low viscosity fluids and are available in several
configurations for UV cure, anaerobic fluids, cyanoacrylate resins, solvent and volatile
liquid dispensing. Shot size is adjustable in the microliter range from 0.0001cc and
valves can cycle up to 500 per second dependant upon the valve type.
Pinch Tube Valve
A pinch tube valve can be used in many situations, it is regularly used for volatile
fluids, such as in cyanoacrylate and solvent dispensing. The advantage of the valve
is that the wetted parts are consumable and can be discarded at a moderate cost.
For this reason the valve can also be used with two-part resins and placed at the
end of a static mixing nozzle.
High Pressure Valves
There are two high pressure valves that have fluid pressures above 3000psi, these
are the 790HPNM series spool valve and LV0126NM needle valve. The spool series
is used for high viscosity silicones and grease and has suck-back. The LV0126NM is
suitable for small shots and beads of high viscosity. The valve is adjustable for shot
Needle Mini Valve
A good general purpose needle valve for fine shots and small beads of medium
viscosity materials. The valve is available with stainless steel wetted chambers
suitable for UV cure, plastic chambers for anaerobic dispensing and
aluminum as a standard configuration for silicones, grease and lubricants.
Poppet valves are a lighter version of a spool valve offering small shots and bead
dispensing of medium-high viscosity fluids with a gentle snuff-back feature that
prevents run-on. Poppet valves can be cycled up to 300 cycles per minute and are
suitable for silicones, grease and paste.
Our spray valve is the result of years of research and trials, spraying paints and
varnishes requires anti-clogging technology and therefore the valve must be used
with an SVC100 controller. Our spray valve is the best available. Atomizing air
pressure is sequenced to commence prior to and post fluid flow so that the valves
orifice is kept clean at all times.
Positive Displacement Valves
Positive displacement valves are available as auger valves, adjustable chamber
volumetric valves or peristaltic dispensing pumps. An auger valve is a servo motor
driven cavity auger that delivers material under control from its controller. This
valve is suitable for high viscosity pastes. A volumetric valve has an adjustable
chamber for accurate deposits.
Texas & Mexico